Benjamin strikje: Stoffen opties

De vlinderdasjes die je in de winkel vindt zijn meestal gemaakt uit zijde of imitatiezijde (vaak polyester). Het is dus niet verrassend dat dit goede opties zijn. Any type of fabric that you like the pattern or looks of can become a candidate for a bow tie. The only real limitation is that the bow tie will have to be turned inside out through a tube that is only 2cm across. Met sommige zwaardere stoffen kan dit een probleem vormen.

Bow ties are more whimsical than normal ties, so having a fun pattern or loud colour is not as much of a problem as it would be with a regular tie.

Zijde en imitatiezijde is glad en lastig om mee te werken. This can be compensated for with a fusible interfacing.

Tussenvoering

Afhankelijk van de stof die je kiest voor je vlinderdas ga je waarschijnlijk tussenvoering nodig hebben. Interfacing comes in two main types: fusible and sew-in.

The fusible variety has some adhesive attached to one side that is activated with the heat of your iron. Dit bevestigt de tussenvoering aan de stof, en vanaf dan worden de twee als één stuk behandeld. Fusible interfacing can be a great option if your fabric allows the heat required, and you use a quality interfacing. Some lesser quality interfacings can have the adhesive detach, and this shows as bubbles on the fabric surface later on in the life of your bow tie. Good quality interfacings and correctly following the guidelines for adhering the interfacing will not present these problems.

Tussenvoering om in te naaien wordt op zijn plek genaaid voor de stof gebruikt wordt. You attach the interfacing to the fabric by sewing the two together inside the seam allowance. If you use a seam allowance of 6mm, you will sew the interfacing at 3mm. Eender wat kan dienen als tussenvoering om in te naaien, alsook een extra laag van je stof.

Het doel van de tussenvoering is je vlinderdas de structuur te geven die je wil. You can have a bow tie that stands proud and crisp. Of een die de boel wat meer laat hangen. This is all about your preference.

It is good to experiment with the interfacing on a scrap piece of your fabric, specially with the fusible kind. You want to make sure you get the structure you like before committing it to your pattern pieces.

Although the pattern calls for applying interfacing to all parts, if you have thick or stiff fabric, you may be able to only do one side, or no sides at all.